UM0027_ SOL APOLLO Series 7.4-22K_EN_V02_0523 7
2 Safety
2.1 Intended use
The EV charger is an AC charging device.
The EV charger may automatically adjust its output power during operation due
to non-ideal conditions e.g., extremely high ambient temperatures.
The EV charger can only be operated in accordance with the information
provided in the enclosed documentation and with the locally applicable laws,
regulations and standards. Any other application may cause personal injury or
property damage.
The EV charger must be used as a stationary device.
All components of the EV charger must remain within their permitted operating
ranges at all times.
Adapters, extension cables and conversion cables must not be used with either
version of the EV chargers.
2.2 Safety standards
SOL APOLLO EV chargers comply with the EU Low-Voltage Directive
2014/35/EU and the EMC Directive 2014/30/EU. The EV charger also compli-
es with the requirement for safety and EMC in European market. They are la-
beled with the CE mark.
For more information about certificates in other countries and regions, please
visit website ( www.solplanet.net ).
2.3 Important safety information
Before installing, operating or maintaining this product, it is important to read
and ensure that the contents of the following Guide are fully understood. Failure
to follow all the specified instructions and procedures, will invalidate the warran-
ty and as such Solplanet will not be liable for any claims for compensation.
To Next Page
Loading...