Solplanet SOL APOLLO Series - Interfaces

UM0027_ SOL APOLLO Series 7.4-22K_EN_V02_0523 27
Purple - blinking (twice)
Invalid RFID card
Purple - blinking (three times)
Binding RFID cards over limit
4.4 Interfaces
The SOL APOLLO EV charger is equipped with the following interfaces and
functions:
WLAN
The EV charger is supplied with WLAN interface as standard.
BLE
The EV charger is supplied with a BLE (identifiable by the EV charger serial
number) interface as standard. The BLE connection facilitates a point-to-point
connection between the EV charger and a smart mobile device.
Ethernet (optional)
The EV charger is supplied with Solplanet Speedwire as optional configura-
tion, which is a type of communication based on the Ethernet standard. Sol-
planet Speedwire is designed for a data transfer rate of 100 Mbps and enables
optimum communication between the EV charger and the Ai-charging app via
a router.
4G (optional)
The EV charger is supplied with a 4G module which allows an LTE-
FDD/WCDMA/GSM network connection link in situations where there is no
WLAN or ethernet available.
NFC Authorization
This function activates the EV charger by detecting the digital key stored in a
smart phone or smart device. Check whether the smart phone is compatible
with NFC and NFC function which is required to be activated. Follow your