Cleaning and maintenance
46/78
7.9 Cleaning or replacing UV lamps in the
base
– Lift up the acrylic panel and the partition: see page 37.
– Remove the lamp covers at the head and foot ends.
Replacing lamps: see page 43.
The assembly is the same process in reverse order.
7.10 Cleaning or replacing the UV lamps in
the side section
– Removing the side section panel: see page 40.
Replacing lamps:
UV low pressure lamps: see page 43.
UV high pressure lamps and filter panels: see page 44.
When assembling the device please note:
– Re-lock the locks.
To Next Page
Loading...
