Cleaning and maintenance
58/78
– Screw the lid with the hose onto the new canister.
– Push the hose well down so that it touches the bottom of the canister.
– Put the canister back in the device.
– Close the bed base. You should hear the bed base click into place.
Venting
NOTE:
To ventilate, access to the Professional Setup Manager is
required.
– Go to the Professional Setup Manager.
– Activate the fill mode in the AQUA MIST AROMA menu
– Close the canopy.
The system will now be ventilated for 1 minute. AQUA SYSTEM liquid will be
released from the nozzles during this period.
– Test the AQUA SYSTEM function afterwards. Repeat the ventilation
process if it does not work.
To Next Page
Loading...
