Need help?Do you have a question about the Sonardyne 6G and is the answer not in the manual?
General safety recommendations and warnings for operating the equipment.
Contact information and hours for non-emergency and emergency product support.
Details the transponder types covered by the guide and the supplied Dual Test Lead.
Instructions and illustrations for connecting the Dual Serial Cable to the transponder.
Securing the cable and identifying the CPU/DAS connectors for connection.
Procedure to upgrade the HOST firmware using the GP Bootloader software.
Continues HOST firmware upgrade: selecting TOC, checking connections, and deleting applications.
Continues HOST firmware upgrade: erasing applications, starting bootload, and confirming success.
Procedure to upgrade the DAS firmware using Wideband Test Terminal (WTT) and DASCAL software.
Continues DAS firmware upgrade: connecting to Comms Port and selecting DAS software.
Continues DAS firmware upgrade: disconnecting, loading new program, and navigating the DASCAL interface.
Continues DAS firmware upgrade: selecting the program file, upgrade commencement, and success notification.
Continues DAS firmware upgrade: reviewing test reports and running acoustic checks.
Continues DAS firmware upgrade: reading test reports and identifying firmware version (FVI).
Procedures for closing programs, powering off, disconnecting cables, and packing the equipment.
General| Environmental Protection | IP68 |
|---|---|
| Power Supply | 24 VDC |
| Acoustic Frequency | 8 – 35 kHz |
| Range | Up to 10, 000 m |
| Position Accuracy | Better than 0.1 m |
To Next Page
