OPERATING MANUAL MPI-530-IT version 1.06
Press and hold START push-button.
Measurement is performed continuously
when the push-button is held in the pressed
position.
In order to maintain the measurement,
press ENTER push-button while holding
START push-button in the pressed posi-
tion. In order to interrupt the mesaurement,
press START.
View of the screen during
measurement performed
with the use of ENTER-
push-button.
During measurements of insulation resistance, dangerous voltage up to 1 kV
occurs at the ends of test leads of MPI-530-IT.
To Next Page
Loading...
