Sonel MPI-530-IT - Low-Voltage Measurement of Resistance; Measurement of Resistance of Protective Conductors and Equipotential Bonding with ±200 Ma Current

OPERATING MANUAL MPI-530-IT version 1.06
70
Note:
- Remarks and messages are the same as in point 3.7.1.
3.8 Low-voltage measurement of resistance
3.8.1 Measurement of resistance of protective conductors and equipoten-
tial bonding with ±200 mA current
Settings
Set the rotary switch of function selection at
R
X
R
±200mA
position.
Press F1 and move to the selection of the measurement
mode.
Use and to select R
CONT
±200mA, con-
firm by pressing ENTER.