Sonel MPI-530-IT - Extending the Memory Structure

OPERATING MANUAL MPI-530-IT version 1.06
89
If you try to store data in an occupied memory cell, the following warning mes-
sage will appear:
or
Press ENTER, to overwrite the result or ESC, to
cancel saving.
Note:
- In case of RCD the above warning message will appear also when an attempt is made to store a re-
sult of specific measurement (or result component) that has been made at different preset I
n
current
or for a different preset type of RCD (standard / short-time delay / selective) than the measurements
the results of which are already stored in this cell, despite the fact that the memory space designated
for this result component may be free. When results of measurements made for a different type of
RCD or a different I
n
current are stored, the results concerning a given RCD that have been stored
previously will be lost.
4.2.2 Extending the memory structure
Press ESC to start creating the objects.