Sonel MPI-530-IT - Measurement of Resistance

OPERATING MANUAL MPI-530-IT version 1.06
73
Additional information displayed by the meter
NOISE!
Interference voltage occurs on the tested object. The
measurement is possible however it will be burdened
with additional uncertainty that is specified in specifi-
cations.
3.8.2 Measurement of resistance
Settings
Set the rotary switch of function selection at R
X
R
±200 mA
position.
Press F1 push-button and move to selection of
measurement mode.
Use and to select R
X
, confirm by press-
ing ENTER.