EFFECT LIST
Cut - Counterclockwise controls the tone brightness
Output/Master/VOL - Controls the amp output volume
PRES - Controls the amp presence
Bass - Controls the amp low frequency response
Middle - Controls the amp mid frequency response
Treble - Controls the amp high frequency response
Bright - Switches extra brightness on/off
Char - Selects from 2 gain ranges (Cool/Hot)
MRange - Selects mid frequency ranges
Balance - Controls the tone control balance
Freq - Controls the EQ center frequency
EQ Q - Controls the EQ bandwidth
EQ Gain - Controls the EQ boost/cut amount
®
Based on the famous ISP Decimator™* noise gate pedal.
Flexible noise gate with attack and release control
NR Module
*The manufacturers and product names mentioned above are trademarks or registered trademarks of their respective owners.
The trademarks were used merely to identify the sound character of the products.
Thre - Controls the noise gate threshold
Attack - Controls how fast the noise gate start to process signal
Rel - Controls the noise gate release time when signal level reaches
20
EFFECT LIST