Handling
Connecting the power and input/output jacks
Always turn OFF the power to the unit and all other equipment before
connecting or disconnecting any cables.
Also make sure to disconnect all connection cables and the AC adapter
before moving the unit.
Cleaning
Clean only with a dry cloth.
Alterations
Do not open the unit.
Do not attempt to service the unit yourself.
Opening the chassis for any reason will void the manufacturer’s warranty.
AC Adapter Operation
Always use a DC9V center negative 500mA AC adapter. Use of an
adapter other than that specified could damage the unit or cause
malfunction and pose a safety hazard. Always connect the AC adapter to
an AC outlet that supplies the rated voltage required by the adapter.
Unplug the unit during lightning storms or when unused for long periods of
time.
Malfunction
If the unit should malfunction, disconnect the AC adapter and turn
the power OFF immediately. Then, disconnect all other connected
cables.
Prepare information including the model name, serial number,
specific symptoms related to the malfunction and contact
SONICAKE support (support@sonicake.com).
ATTENTION
1
Do not get the unit wet. If liquid is spilled on the unit, shut it off immediately.
Do not block any of the ventilation openings.
Keep away from heat sources.
Disconnect the unit during storms to prevent damage.
Operation of this unit within significant electromagnetic fields should be
avoided.
ATTENTION
To Next Page
Loading...