SONICAKE MATRIBOX - TROUBLESHOOTING; Power and Sound Issues; Noise and Signal Problems; Expression Pedal Issues

TROUBLESHOOTING
Device Won’t Turn On
 Make sure the power supply is properly connected.
 Check if the power adapter is working properly.
 Check if you’re using the correct power adapter.
No Sound Or Slight Sound
 Make sure your cables are connected properly.
 Make sure the volume knob is adjusted properly.
 When the expression pedal is used for volume control, check it’s position
and volume settings.
 Check the effects module volume settings.
 Check the preset volume settings.
 Make sure your input device is not muted.
Noise
 Make sure your cables are connected properly.
 Check your instrument output jack.
 Check if you’re using the correct power adapter.
 If the noise is coming from your instrument, try using the noise reduction
module to adjust it.
Sound Problems
 Make sure your cables are connected properly.
 Check your instrument output jack.
 If you’re using this device with other pedas, check to see if other pedas
are set up properly.
 Check your effects parameter setup. If effects are set to extremes,
Matribox may only emit noise.
Problems With Expression Pedal
 Check your expression pedal on/off settings.
 Try calibrating the pedal.
27
TROUBLESHOOTING