Sony a (alpha) SLT-A33 - Changing the Function of the Buttons

150
Changing the function of the buttons
The function of the AEL button can be selected from the following two
functions:
– Holding the locked exposure value by pressing the AEL button while
the button is held down ([AEL hold]).
– Holding the locked exposure value by pressing the AEL button until the
button is pressed again ([AEL toggle]).
MENU button t 1 t [AEL button] t Select the desired
setting
Notes
• While the exposure value is locked, appears on the LCD monitor and in the
viewfinder. Be careful not to reset the setting.
• The [AEL hold] and [AEL toggle] settings affect the manual shift (page 78) in the
manual exposure mode.
• When [AEL toggle] is selected, be sure to press the AEL button again to release the
lock.
If you use a lens equipped with a focus hold button, you can change the
function of the button to preview a shot.
MENU button t 1 t [Focus Hold Button] t [D.O.F.Preview]
You can zoom the image to check the focus using the button during
shooting.
MENU button t 1 t [Focus Magnifier] t [On]
Changing the operation of the AEL button
Changing the function of a focus hold button to the preview
function
Enabling the Focus Magnifier function