Note
If centre audio is not output from the TV, enable [Settings] — [Display & Sound] —
[Audio output] — [Audio system settings] — [Acoustic Center Sync].
Connecting an AV receiver with a speaker cable (only models
with a CENTER SPEAKER IN terminal)
Connect the TV and AV receiver with a speaker cable.
(A) AV receiver
(B) Speaker cable (not supplied)
Use a speaker cable (not supplied) to connect the AV receiver to the CENTER SPEAKER IN
terminal of the TV.
When connecting, make sure to twist the ends of the speaker cable and insert them into the
connection terminals of the TV and AV receiver.
The CENTER SPEAKER IN terminal varies depending on the model. Refer to the figures
below when connecting the speaker cable.
To Next Page
Loading...
