To check the server connection
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network
and Internet] — [Home network setup] — [Server diagnostics] — follow the on-screen
instructions to perform diagnostics.
To use the renderer function
Connect the renderer device (TV), the server device (BD/DVD recorder), and the device that
controls the server and renderer (smartphone) to the same network. You can use the
smartphone to operate the TV within the same network.
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network
and Internet] — [Home network setup] — [Renderer] — the desired option.
[Renderer function]
Enable the renderer function.
You can play photo/music/video files in a controller (e.g., digital still camera) on the TV
screen by operating the device directly.
[Renderer access control]
Select [Automatic access permission] to access the TV automatically when a controller
accesses the TV for the first time.
Select [Custom settings] to change the access permission settings of each controller.
To use the remote device
Press the (Quick Settings) button on the remote control, then select [Settings] — [Network
and Internet] — [Remote device settings] — the desired option.
[Control remotely]
Enable operation of the TV from a registered device.
[86] Home network features | Home network features
To Next Page
Loading...
