103
Adjusting the focus
Adjusting the focus
• The outline of in-focus ranges is not enhanced when the camera is connected using
an HDMI cable.
To set the color of the peaking function
You can set the color used for the peaking function.
MENU button t 3 t [Peaking Color] t Select the desired setting
Note
• This item cannot be set when [Peaking Level] is set to [Off].
You can check the focus by enlarging the image before shooting.
Focus Magnifier
1 MENU button t 4 t [Smart Telecon. Button] t [Focus
Magnifier]
2 Press the Focus Magnifier button.
Focus Magnifier button
To Next Page
Loading...
