180
Setting the other functions of the camera
When [PAL/NTSC Selector] is set to the NTSC-system before shooting,
movies recorded with the camera can be played back on an NTSC-system
TV.
MENU button t 3 t [PAL/NTSC Selector] t Select the
desired setting
Notes
• This function is provided with 1080 50i-compatible devices only. It is not provided
with 1080 60i-compatible devices. The 1080 50i-compatible devices have a “50i”
mark on the bottom of the camera.
• If you insert a memory card that has previously been formatted with the PAL system,
a message telling you that you must re-format the card appears. When you record
using the NTSC system, re-format the memory card or use another memory card.
• When the NTSC mode is selected, the “Running on NTSC.” message always
appears on the start-up screen each time you turn the camera on.
PAL/NTSC Selector (only for the 1080 50i-compatible
device)
To Next Page
Loading...
