C
0
~
(l)
C.
0
Section 1 Operation
1-3-3. Subcontrol Panels inside the Drawer
1 -12 11. Operation
Insert the supplied drawer key into the keyhole of the drawer lock,
turn it 90° clockwise and pull the drawer out.
Adjust the button and controls on the subcontrol panels when the
monitor is fully warmed up. Warm-up time will be at least 30 minutes
after the power has been turned on.
Drawer key (supplied)
Subcontrol panels
For turning the controls on the DA and DC boards, use the supplied
screwdriver.
To Next Page
Loading...
