C
0
·~
Q)
a.
0
Section 1 Operation
1 -32 11. Operation
2 Press the JJ button until the cursor reaches PASSWORD, then
press the ENT button.
The message "ENTER PASSWORD" is displayed.
3 Enter the current password (Factory-set: 9999).
The PASSWORD MENU is displayed.
PASSWORD MENU
• CHANGE PASSWORD
APPLY PASSWORD
SELECT AND PRESS ENT
4 Select the CHANGE PASSWORD option.
The message "ENTER NEW PASSWORD" is displayed.
5 Enter any desired four-digit number as your new password using
the buttons labeled O to 9.
The message "PLEASE RE-ENTER NEW PASSWORD TO
CONFIRM" is displayed.
6 Enter the new password again.
The message "PASSWORD CHANGED" is displayed and the
new password is now valid.
mm
If an incorrect password is entered, "INCORRECT ENTRY.
PASSWORD NOT CHANGED" is displayed and the menu operation
is canceled.
To cancel the operation
Press the ESC button before re-entering the new password in step 6.
To Next Page
Loading...
