5
GB
System requirements
The following hardware and software are necessary to use the MD
Editor 2 software.
π IBM PC/AT or compatibles (This software does not run on
Macintosh.)
π RAM Memory: 16MB or more (32MB or more is recommended.)
π Video board and display driver:
VGA (640 × 480 pixels), 65,536 colors or more
displayable.
π Hard disc space: 20MB or more (When installing both MD Editor 2
and Label Maker.)
π CD-ROM drive
π Serial port: 1 or more
π OS : Windows 95/Windows 98 (This software does not
run on Microsoft Windows 3.1 or Windows NT.)
π Video monitor: VGA (640 × 480 pixels), 65,536 colors or more
displayable.
Notes
• Set up the serial port that is to be used for this kit so that it is
unavailable to the other softwares.
• To verify that the serial ports of your computer are enabled, call the
vendor of your computer.
To Next Page
Loading...
