Sony CCD-TR814 - Editing Onto Another Tape

You can create vour own video program by editing with any other Cl 8 mm, Hit] Hi8, VMS VHS,
SVMS S-VHS, VMSHVI ISC, SVHSH S-VHSC, R3 Betamax or ED Betamax VCR that has video/
audio inputs.
After connecting the camcorder to the VCR,
(1) Slide the POWER switch to PLAYER.
( 2 ) Insert a blank tape (or a tape you want to record over) into the recording VCR. Then insert your
recorded tape into the camcorder.
( 3 ) Play back the recorded tape on the camcorder until you locate the point where you want to start
editing. Then press II to set the camcorder to playback pause mode.
( 4 ) Set the recording VCR to recording pause mode.
( 5 ) Press II on the camcorder and then on the VCR to start editing.
: Signal flow
To Edit More Scenes
Repeat steps 3 to 5.
To Stop Editing
Press ■ STOP on the camcorder and VCR