To Next PageTo Next Page
Need help?Do you have a question about the Sony CCD-TRV138 and is the answer not in the manual?
General| Sensor type | CCD |
|---|---|
| Number of CCDs | 1 |
| Total megapixels | 0.32 MP |
| Optical sensor size | 1/6 \ |
| Filter size | 37 mm |
| Digital zoom | 990 x |
| Optical zoom | 20 x |
| Image stabilizer | No |
| Focal length range | 2.5 - 50 mm |
| Maximum aperture number | 2.4 |
| Minimum aperture number | 1.6 |
| Focal length (35mm film equivalent) | 42 - 840 mm |
| Camcorder tape type | Hi 8 |
| Camcorder media type | Videotape |
| Internal storage capacity | 0 GB |
| Focus adjustment | Auto/Manual |
| Scene modes | Beach, Landscape (scenery), Portrait, Spotlight, Sunset |
| Built-in light | Yes |
| Camera shutter speed | 1/60 - 1/4000 s |
| Display diagonal | 2.5 \ |
| Viewfinder type | - |
| Viewfinder resolution | 90000 pixels |
| Photo effects | Black&White, Mosaic, Negative film, Pastel, Sepia, Solarisation |
| Camcorder type | Handheld camcorder |
| Minimum illumination | 1 lx |
| Product color | Black, Silver |
| Video formats supported | MPEG2 |
| Maximum video resolution | - pixels |
| Analog signal format system | NTSC |
| Audio system | Dolby Digital |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Battery type | NP-FM30 |
| Battery voltage | 7.2 V |
| Battery capacity | - mAh |
| Battery life (max) | - h |
| Battery technology | Lithium |
| Video recording time | 4 h |
| Cables included | AV |
| Power consumption (typical) | 2.9 W |
Weight and Dimensions| Depth | 151 mm |
|---|---|
| Width | 85 mm |
| Height | 98 mm |
| Weight | 890 g |
Lists adjustments needed after replacing major components.
Resets or modifies specific page data for system initialization.
Lists required tools and procedures before camera adjustments.
Adjusts hall AMP gain and offset for lens iris position detection.
Adjusts the inner focus lens flange back automatically.
Corrects optical axis deviation between lens and CCD imager.
Sets the picture frame position for color reproduction adjustment.
Adjusts color separation matrix for proper color reproduction.
Adjusts the normal coefficient of the light value.
Sets the reference white balance at 3200K.
Adjusts auto white balance output data for better reproducibility.
Verifies auto white balance performance under various lighting conditions.
Checks angular velocity sensor output and steadyshot function.
Checks for defects on the CCD sensor.
Adjusts LCD display brightness and contrast.
Sets the DC bias for the LCD common electrode drive signal.
Corrects white balance to ensure accurate screen color reproduction.
Connects and uses the remote commander for mechanism adjustments.
Procedures for operating the mechanism without a cassette.
Adjusts the tape path for proper tracking and switching.
Lists required measuring instruments for video adjustments.
Specifies audio/video output levels and impedance.
Details switching between Standard 8 and Hi8 recording modes.
Initializes or modifies system control page data.
Sets CAP FG signal duty cycle for capstan servo.
Sets clock frequency for synchronization.
Adjusts pull-in range of A/D converted clock generator.
Adjusts the sync and burst levels of the line out signal.
Adjusts the Y FM signal recording current.
Checks/adjusts recording current for REC C and AFM signals.
Sets BPF passing frequency for AFM signal separation.
Adjusts audio FM signal deviation for playback level accuracy.
Details operation and precautions for the adjustment remote commander.
Explains hexadecimal to decimal conversion for adjustment data.
Procedures for entering and exiting test modes.
Records and interprets emergency codes and their addresses.
Explains mode switch and mechanism position codes for errors.
Method to discriminate bit values from remote commander display.
Checks operation of specific switches using bit value discrimination.
Checks A/V OUT jack switch status.
Identifies pressed keys by discriminating display data.
Verifies the status of LEDs, video light, and IR light.
Displays and initializes usage data like drum rotation and video light time.
Displays past self-diagnosis codes and their meanings.
