Sony CDP-3100 - Performance Characteristic Checks

Chapter 4 lll
4-8
4-2 Searching for a Cue Point
DS EL SA a RSIS os APS Ae ST ne ER OSes GRE SSeS NSC end i GR ea PC ER fs Ee IeR RN an eS ag
Use this procedure to search for a cue point while monitoring the
audio output.
SKIP indicator
3
1
4
Searching for a cue point with the JOG dial
Press the JOG key.
Enter the track number to be searched with the numeric keys.
Turn the JOG dial to finely adjust the cue point while monitoring
the audio output.
Press the STANDBY key.
The player enters STANDBY mode at the specified point.
Ol i> oO nO —
Press the PLAY key.
Playback starts from the specified cue point.
If as a result of monitoring you want to change the cue point,
repeat the procedure from step 1.
To play back at high speed
During monitor play mode, after checking that the SKIP indicator is
on, turn the JOG dial to start high-speed playback. If the SKIP
indicator is off, press the LINE OUT switch so that the LINE OUT
indicator goes off and the SKIP indicator goes on.
Chapter 4 Operations