,
,,~
Card remote commander
RM-X151
*
In
the case
of
a
ColMo
changer,
Ho
radio tuner
or
SAT tuner being connected; when
(SOURCE)
is
pressed, the connected device ("Mo," "Ho," "XM" or
"SR") will appear
in
the display, depending on which
device is connected. Furthermore, if (
MODE)
is
pressed, you can switch the changer,
Ho
radio tuner
band
or
SAT tuner band.
(A
Ho
radio tuner
or
SAT tuner can only be
connected
to
the CoX-H9051P.)
Note
If the unit is turned
off
and
the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed,
or
a disc is
inserted
to
activate the unit first.
" The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 7).
P1D
..
(~)/
..
(~)
buttons
To
control CD/radio/PO, the same as
(SEEK)
-/+
on the unit.
Setup, sound setting, etc., can be operated
by
.....
g)
VOL (volume)
+/-
button
To
adjust volume.
P!J
ATT (attenuate) button
To
attenuate the sound.
To
cancel, press
agaIn.
fE
t (+)/
..
(-)
buttons
To
control CD/PO, the same as
(GP/ALBM)
-/+
on the unit.
Setup, sound setting, etc., can be operated by
t
...
f))
SeRl
(scroll) button
To
scroll the display item.
f1g
Number buttons
To
receive stored stations (press); store
stations (press and hold).
10
To Next Page
Loading...
