•
24
Error displays/Messages
BLANK
Tracks have not been recorded on the MD.*1
--+
Play an MD with recorded tracks.
ERROR*2
• The disc
is
dirty
or
inserted upside down.*1
--+
Clean
or
insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
--+
Insert another disc.
FAILURE
The connection
of
speakers/amplifiers is incorrect.
--+
See the installation guide manual
of
this model to
check the connection.
FAILURE (Illuminates for about I second.)
(CDX-H905IP only)
When the XM tuner is connected, storing an
XM
radio
channel into a preset failed.
--+
Be sure to receive the channel that you want
to
store, then try it again.
LOAD
The
changer is loading the disc.
--+
Wait until loading is complete.
L.
SEEK
+/-
The local seek mode is on during automatic tuning.
NO AF (CDX-HR905IP only)
There is no alternative frequency for the current
station.
--+
Press
(SEEK)
-/+
while the program service name
is f1ashing. The unit starts searching for another
frequency with the same PI (Program
Identification) data ("PI SEEK" appears).
NO DISC
The disc
is
not inserted
in
the CD/MD changer.
--+
Insert discs
in
the changer.
NO INFO
Text information is not written in the MP3IWMA/
AAC files
or
ATRAC CD.
NO IPOD
No iPod connected.
--+
Connect iPod to dock connector.
If
"NO
IPOD" appears while connecting the iPod to
the dock connector, disconnect the iPod from the dock
connector, then reconnect.
NO
MAG
The disc magazine is not inserted
in
the
CD
changer.
--+
Insert the magazine
in
the changer.
NO MUSIC
The disc does not contain a music file.
--+
Insert a music CD
in
this unit or MP3 playable
changer.
NO NAME
A disc/group/track name is not written in the track.
NO TP (CDX-HR905IP only)
The unit will continue searching for available
TP
stations.
NOTREADY
The lid
of
the MD changer is open or the MDs are not
inserted properly.
--+
Close the lid
or
insert the MDs properly.
OFFSET
There may be
an
internal malfunction.
--+
Check the connection.
If
the error indication
remains on
in
the display, consult your nearest
Sony dealer.
READ
The unit is reading all track and group/album
information on the disc.
--+
Wait until reading is complete and playback starts
automatically. Depending on the disc structure,
it
may take more than a minute.
RESET
The
CD
unit and CD/MD changer cannot be operated
due to a problem.
--+
Press the RESET button (page 7).
"L
L L
L"
or
"-,
-,
-,
-,
"
During reverse or fast-forward, you have reached the
beginning or the end
of
the disc and you cannot go any
further.
The character cannot be displayed with the unit.
*I
The
disc number
of
the disc causing the error
appears
in
the display
*2
If
an
error occurs during playback
of
a CD
or
MD,
the disc number
of
the CD
or
MD does not appear
in
the display
If
these
solutions
do
not
help
improve
the situation,
consult
your
nearest
Sony
dealer.
If
you
take
the
unit
to
be
repaired
because
of
CD
playback
trouble,
bring
the disc
that
was
used at
the
time
the
problem
began.
To Next Page
Loading...
