•
12
Tuning automatically
1 Select the band, then press
(SEEK)
-/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station
is
received.
Tip
If
you know the frequency
of
the station you want to
listen
to,
press
and
hold
(SEEK)
-/+
to locate the
approximate frequency, then press
(SEEK)
-/+
repeatedly
to
fine adjust
to
the desired frequency
(manual tuning).
ROS
(CDX-HR905IP)
Overview
FM
stations with Radio
Data
System (RDS)
service send inaudible digital information along
with the regular radio program signal.
Display items
o Radio band, Function
Q
TArrp*l
e Frequency*2 (Program service name), Preset
number, Clock, RDS data
*1 "TA" flashes during traffic information. ''TP'' lights
up while such a station
is
received.
*2 While receiving the RDS station,
"*"
is
displayed
on the left
of
the frequency indication.
To change display items
e,
press
(OSPL).
RDS services
This unit automatically provides RDS services as
follows:
AF
(Alternative Frequencies)
Selects and retunes the station with the
strongest signal
in
a network. By using this
function, you can continuously listen to the
same program during long-distance voyage
without having to retune the same station
manually.
TA
(Traffic Announcement)ITP (Traffic
Program)
Provides current traffic information/programs.
Any information/program received, will
interrupt the currently selected source.
PTY (Program Types)
Displays the currently received program type.
Also searches your selected program type.
CT
(Clock Time)
The
CT
data from the RDS transmission sets
the clock.
Notes
• Depending on the country/region, not all RDS
functions may be available.
• RDS will not work if the signal strength is too weak,
or
if
the station you are tuned
to
is
not transmitting
RDS data.
Setting
AF
and TA
1 Press
(AFff
A)
repeatedly until the
desired setting appears.
Select
To
AF-ON
activate
AF
and deactivate TA.
TA-ON
activate
TA
and deactivate
AF.
AF,
TA-ON
activate both
AF
and TA.
AF,
TA-OFF
deactivate both AF and TA.
Storing RDS stations with the AF and
TA
setting
You can preset RDS stations along with the AF/
TA
setting.
If
you use the BTM function, only
RDS stations are stored with the same
AFITA
setting.
If
you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1
Set
AFrrA,
then store the station with BTM
or
manually.
Receiving emergency
announcements
With
AF
or
TA
on, the emergency
announcements will automatically interrupt the
currently selected source.
Tip
If
you adjust the volume level during a traffic
announcement, that level will be stored into memory
for subsequent traffic announcements, independently
from the regular volume level.
To Next Page
Loading...
