Card remote commander operation is not
possible.
Make sure the insulation film has been removed
(page 7).
DSO does not function.
Depending on the boat's interior or type
of
music,
DSO may not have a desirable effect.
CD/MDplayback
The disc cannot be loaded.
• Another disc is already loaded.
• The disc has been forcibly inserted upside down or
in
the wrong way.
The disc does not playback.
• Defective or dirty disc.
• The CD-Rs/CD-RWs are not for audio use (page 19).
• The disc format and file version are incompatible
with this unit (For details, refer to page 6 and 19).
MP3IWMA/AAC files take longer to play back
than others.
The following discs take a longer time to start
playback.
- a disc recorded with a complicated tree structure.
- a disc recorded in Multi Session.
- a disc to which data can be added.
The ATRAC CD cannot play.
• The disc
is
not created by authorized software, such
as SonicStage or SonicStage Simple Burner.
• Tracks that are not included in the group cannot be
played.
The display items do not scroll.
• For discs with very many characters, those may not
scroll.
• "A.SCRL" is set to
"OFF'.
- Set "A.SCRL-ON" (page
16)
or
press
(SeRl).
The sound skips.
• Installation is not correct.
- Install the unit at an angle
of
less than 45°
in
a
sturdy part
of
the boat.
• Defective
or
dirty disc.
The operation buttons do not function.
The disc will not eject.
Press the RESET button (page 7).
Radio reception
The stations cannot be received.
The sound is hampered
by
noises.
• Connect a power antenna (aerial) control lead (blue)
or accessory power supply lead (red) to the power
supply lead
of
the boat's antenna (aerial) booster
(only when the boat has built-in antenna (aerial».
• Check the connection
of
the boat antenna (aerial).
• The auto antenna (aerial) will not go up.
- Check the connection
of
the power antenna
(aerial) control lead.
• Check the frequency.
• When the DSO mode
is
on, the sound is sometimes
hampered by noises.
- Set the DSO mode to
"OFF"
(page 9).
Preset tuning is not possible.
• Store the correct frequency
in
the memory.
• The broadcast signal
is
too weak.
Automatic tuning is not possible.
• Setting
of
the local seek mode
is
not correct.
- Tuning stops too frequently:
Set "LOCAL-ON" (page 16).
- Tuning does not stop at a station:
Set "MONO-ON" (page 16).
•
The
broadcast signal
is
too weak.
- Perform manual tuning.
During
FM
reception, the
"ST"
indication
flashes.
• Tune in the frequency accurately.
• The broadcast signal
is
too weak.
- Set "MONO-ON" (page 16).
An FM program broadcast
in
stereo
is
heard
in
monaural.
The unit is in monaural reception mode.
-Set
"MONO-OFF" (page 16).
RDS
(CDX.HR9051P)
The SEEK starts after a few seconds of
listening.
The station is non-TP or has weak signal.
- Deactivate
TA
(page 12).
No traffic announcements.
• Activate TA (page 12).
• The station does not broadcast any traffic
announcements despite being
TP.
- Tune
in
another station.
PTY displays
"-
- - - - - - -."
• The current station is not an RDS station.
• RDS data has not been received.
•
The
station does not specify the program type.
II
23
To Next Page
Loading...
