Changing the sound and
display
Settings
- Menu
The following items can be set:
SET (Set Up)
l
CLOCK (page 9)
l
BEEP - to turn the beeps on or off
l
RM (Rotary Commander) - to change the
operative direction of the controls of the
rotary commander
- Select “NORM” to use the rotarv
commander as the factory-set position
-
Select “REV” when you mount the rotary
commander on the right side of the
steering column
DSPL (Display)
l
D INFO (Dual Information) - to display the
clock and the play mode at the same time
(ON)
l
M DSPL (Motion Display) - to select the
Motion Display mode from “1,” “2,” and
“OFF ”
-
Select “1” to show decoration lines in the
display and activate Demo display
-
Select “2” to show decoration lines in the
display and deactivate Demo display
- Select “OFF” to deactivate the Motion
Display
l
A SCRL (Auto Scroll)
-
Select “ON” to scroll all automatically
displayed names exceeding 8 characters
- When Auto scroll is set to off and the
disc/track name is changed, the disc/
track name does not scroll
SND (Sound)
l
LOUD (Loudness) - to enjoy bass and treble
even at low volumes The bass and treble will
be reinforced
P/M (Play Mode)
l
LOCAL-ON/OFF (Local seek mode)
(page 11)
- Select “ON” to only tune into stations
with stronger signals
l
MONO-ON/OFF (Monaural mode) (page 11)
- Select “ON” to hear FM stereo broadcast
in monaural Select “OFF” to return to
normal mode
Press <MENU_)
To set A SCRL, press (MENU) during CD
Playback
Press either side of (PRESET) repeatedly
until the desired item appears
Press the (+) side of (SEEK) to select the
desired setting (Example: ON or OFF).
4
Press (ENTER)
After the mode setting is completed, the
display returns to normal play mode
Note
The displayed item will differ depending on he
source
Tip
You can easily switch among categories (“SET, II
“DSPL, ” “SND, ” and mPIM”) by pressing either side
of (PRESET) for 2 seconds
l
IF AUTO/WIDE (page 11)
16
To Next Page
Loading...
