1 Press
(ZAP)
during playback.
After "ZAPPIN" appears in the display,
playback starts from a passage
of
the next
track.
The passage
is
play,ed for the set time, then a
click sounds and
th(~
next passage starts.
Track
L-
t
If
Tlhe
part
of
each track to
pllayback in ZAPPIN mode.
2 Press the select button or
(ZAP)
when
a track you want to listen is played
back.
The track that you select returns
to
normal
play mode from
the:
beginning.
To
search a track by ZAPPIN mode again,
repeat steps I and
2.
Tips
•
You
can select the playback time from about 6
seconds/9 seconds/3D seconds (page
17).
You
cannot select the passage
of
the track to playback.
• Press
(SEEK)
-/+
or
CD/G) (ALBUM
-/+)
in
ZAPPIN mode to skip
Cl
track
or
album.
• Pressing
~
(BACK)
a./so
confirms a track
to
playback.
Radio
Storing
and
receiving
stations
Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing automatically - BTM
1 Press
(SOURCE)
repeatedly until
"TUNER" appears.
To
change the band, press
(MODE)
repeatedly.
You
can select from FM I, FM2,
FM3, AMI or AM2.
2 Press and hold
(BTM)
until "BTM"
flashes.
The unit stores stations in order
of
frequency
on the number buttons.
A beep sounds when the setting
is
stored.
Storing manually
1 While receiving the station that you
want to store, press and hold a
number button
(CD
to
®)
until
"MEM" appears. _
Note
If
you
try
to store anotherstation
on
the same number
button, the previously stored station will be replaced.
Receiving the stored stations
1 Select the band, then press a number
button
(CD
to
®).
Tuning automatically
1 Select the band, then press (
SEEK)
+/-
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station
is
received.
Tip
If
you know the frequency
of
the station you want to
listen
to,
press
and
hold
(
SEEK)
+/-
to locate the
approximate frequency, then press
(SEEK)
+/-
repeatedly to fine adjust to the desired frequency
(manual tuning).
11
To Next Page
Loading...
