Adjusting
setup
items
-
SET
1 Press and
hold
the
select
button.
The setup display appears.
2 Press
the
select
button
repeatedly
until
the
desired item appears.
3 Rotate
the
control
dial
to
select
the
setting
(example
"ON"
or
"OFF").
4 Press and
hold
the
select
button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and
setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 6)
BEEP
Activates the beep sound: "ON,"
"OFE"
AUX-A*l (AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 18).
AUTO OFF
Shuts offautomatically after a desired time
when the unit
is
turned off: "NO," "30S
(seconds)," "30M (minutes)," "60M (minutes)."
DEMO (Demonstration)
Activates the demonstration: "ON,"
"OFE"
DIMMER
Changes the display brightness.
- "AT": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead
is
connected.)
- "ON": to dim the display.
- "OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast
of
the display. The contrast
level
is
adjustable in 7 steps.
ILLUMI (Illumination)
Changes the illumination color: "ILLUMI-I,"
"ILLUMI-2."
M.DSPL (Motion Display)
Selects the Motion Display mode.
- "SA": to show moving patterns and spectrum
analyzer.
- "ON": to show moving patterns.
- "OFF": to deactivate the Motion Display.
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
LOCAL (Local Seek Mode)
- "ON": to only tune into stations with stronger
signals.
- "OFF": to tune normal reception.
MONO*2 (Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "ON,"
"OFE"
ZAP.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
- "ZAP.TIME-l (6 seconds)," "ZAP.TIME-2
(9
seconds)," "ZAP.TIME-3 (30 seconds)."
LPF (Low Pass Filter)
Selects the subwoofer cut-offfrequency:
"OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
LPF NORM/REV (Low Pass Filter Normal!
Reverse)
Selects the phase when the LPF is on: "NORM,"
"REV."
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF,"
"80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
BTM (page 11)
*1 When the unit is turned off.
*2 When
FM
is received.
Memory
backup
Your last settings are stored automatically.
Sound settings (except volume), setup items
(except clock) and tuner presets are stored in the
internal memory
of
the unit.
-
17
To Next Page
Loading...
