Sony CFD-V27 - IC Pin Function Description

— 33 —
6-6. IC PIN FUNCTION DESCRIPTION
IC702 CD DIGITAL SIGNAL PROCESSOR, LCD DRIVE, SYSTEM CONTROL (CXP401-602R)
Pin No. Pin name I/O Description
1 SEIN I CD SENS input.
2 CNIN I CD SENS input.
3 DATO O CD DSP command data output.
4 XLTO O Latch output.
5 CLKO O Clock output for CD DSP command.
6DVSS – Digital ground.
7DVDD – Digital power supply (+5V).
8 MON – Not used (Open).
9 MDP O Spindle motor drive control.
10 MDS – Not used (Open).
11 LOCK O Lock signal output.
12 VPCO2 – Not used (Open).
13 VPCO1 – Not used (Open).
14 VCKI – Not used (Connect to !∞ pin).
15 V16M – Not used (Connect to !¢ pin).
16 VCTL – Not used (“H” level).
17 PCO O Decoder PLL phase comparator output.
18 FILI I Decoder PLL filter input.
19 FILO O Decoder PLL filter output.
20 AVSS – Analog ground.
21 CLTV I Decoder PLL VCO control voltage input.
22 AVDD – Analog power supply (+5V).
23 RF I CD RF signal input.
24 BIAS I Playback EFM asymmetry current constant input.
25 ASYI I Playback EFM asymmerty comparater voltage input.
26 ASYO O Playback EFM full swing output.
27 TEST1 I Test terminal (Fixed at “L”).
28 TEST2 I Test terminal (Fixed at “L”).
29 XRST I CD reset input.
30 XRSTO O CD reset output. “L” : Reset
31 FOK I FOK signal input.
32 LRCK O L/R clock signal output. (Connect to #£ pin)
33 LRCKI I L/R clock signal input. (Connect to #™ pin)
34 PCMD O PCM data output. (Connect to #∞ pin)
35 PCMDI I PCM data input. (Connect to #¢ pin)
36 BCK O Bit clock signal output. (Connect to #¶ pin)
37 BCKI I Bit clock signal input. (Connect to #§ pin)
38 GTOP – Not used (Open).
39 XPCK – Not used (Open).
40 GFS – Not used (Open).
41 RFCK – Not used (Open).
42 C2PO – Not used (Open).
43 DVSS – Digital ground.
44 DVDD – Digital power supply (+5V).
45 XROF – Not used (Open).