41
GB
Amplifier Operations
a)
For details, refer to the page in the parentheses.
b)
This parameter is not available when the sound field is set to “2CH ST.”.
c)
“AUDIO FOR HDMI” and “CONTROL FOR HDMI” scroll across the display, then “AUDIO” and
“CONTROL” appear respectively.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
AUDIO
[5-AUDIO]
(page 45)
Digital audio input decoding
priority
a)
[DEC. PRI.]
DEC. PCM, DEC. AUTO DEC. PCM for:
SA-CD/CD;
DEC. AUTO for:
VIDEO 1, 2, BD,
DVD, SAT, TV
Digital broadcast language
selection
a)
[DUAL]
DUAL M/S, DUAL M, DUAL S,
DUAL M+S
DUAL M
Synchronizes audio with video
output
a)
[A.V. SYNC.]
A.V.SYNC. N, A.V.SYNC. Y A.V.SYNC. N
Digital audio input assignment
a)
[D. ASSIGN]
For details, see “Listening to digital
sound from other inputs (DIGITAL
ASSIGN)” (page 65).
Naming inputs
a)
[NAME IN]
For details, see “Naming inputs”
(page 69).
VIDEO
[6-VIDEO]
(page 46)
Audio for HDMI
a)c)
[AUDIO FOR HDMI]
AMP, TV+AMP AMP
Control for HDMI
a)c)
[CONTROL FOR HDMI]
CTRL OFF, CTRL ON CTRL OFF
Naming inputs
a)
[NAME IN]
For details, see “Naming inputs”
(page 69).
SYSTEM
[7-SYSTEM]
(page 47)
Front speaker distance
a)
[FRT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Center speaker distance
a)
[CNT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround left speaker distance
a)
[SL DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround right speaker
distance
a)
[SR DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround back left speaker
distance
a)
[SBL DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Surround back right speaker
distance
a)
[SBR DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
Subwoofer phase polarity
a)b)
[SW PHASE]
NORMAL, REVERSE NORMAL
Surround speaker position
a)
[SUR POS.]
BEHD/HI, BEHD/LO, SIDE/HI,
SIDE/LO
SIDE/LO
Brightness of the display
a)
[DIMMER]
0% dim, 40% dim, 70% dim 0% dim
A. CAL
[8-A. CAL]
(page 49)
Auto Calibration
a)
[AUTO CAL]
A.CAL NO, A.CAL YES A.CAL NO