69
GB
Other Operations
You can adjust the speed of each X-ROUND
effect.
Press X-ROUND SPEED repeatedly
to adjust the speed of the selected
X-ROUND effect.
Each time you press the button, the display
changes cyclically as follows:
SPEED 1
t SPEED 2
t ... t SPEED 19
t SPEED 20
Note
When you select X-OFF, you cannot adjust the
speed.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
Index name of the input t Selected input t
Selected X-ROUND mode.
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1 Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2 Press AMP MENU.
“1-LEVEL” appears on the display.
3 Press V/v repeatedly to select
“5-AUDIO” or “6-VIDEO”.
4 Press or b to enter the
menu.
5 Press V/v repeatedly to select
“NAME IN”.
6 Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 59).
Adjusting the speed of the
X-ROUND effect
Changing the X-ROUND display
To Next Page
Loading...
