Fordetailson theoperation -_ page2g
You can change the focus method. Use the menu when it is difficult to get the proper focus in
auto focus mode.
co (unlimited distance)
7.0m
3.0m
1.0m
0.5m
Center AF
(m)
Multi AF
(Multipoint AF)
(Still image N)
(Movie 1"81)
Focuses on the subject using a previously set distance to the
subject. (Focus preset)
• When shooting a subject through a net or through window glass.
it is diflicult to get the proper focus in auto locus mode. In these
cases, use of [Focus] is convenient.
Focuses automatically on a subject near the center of the
frame.
• Using this with tile AF lock Rmctiou lets you shoot in the
desired image composition.
AF range finder frame
AF range finder frame
indicator
Focuses automatically on a subject in all ranges of the finder
frame.
• This mode is useflfl when the subject is not in the center of the
frame.
AF range finder frame
AF range finder frame
indicator
• AF stands lor Auto Focus.
• Distance setting inR>rmatiou in [Focus] is approximate. If you point the lens up or down, the error
increases.
• The distance selection is limited according to tile Scene mode (page 27).
• When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount
of vibration.
• When you use [Digital Zoom] or [AF Illuminator], priority AF movement is given to snbjects in or near
the center of the frame. In this case the N or El indicator flashes and the AF range finder frame is not
displayed.
32