Fordetailsontheoperation -, page2g
"_° If the subject is out of focus
When silouting witil the subject at the edge nlthe flame (or the screen), or when using [Center AF], tize
camera may not focus nn a subject at the edge of the frame. In a case like this, do as follows.
@ Recompose the shot so Ihat the subject is centered in the AF range finder, and press the shutter
button halfway down to focus on the subject (AF lock).
AE/AF lock indicator
AF range finder frame
As long as you do not press the shutter button l'ully down, you can retry the procedure as many
times as you want.
@ When the AE/AF lock indicator stops l'lashing and remains on, return to the fully composed shot,
and press the shutter button fully down.
==
Selects the metering mode that sets which part of the subject to measure to determine the
exposure.
Spot (Spot metering)
(1";1)
Measures only a part of the subject.
• This function is nsethl wizen the snbject is backlit or wizen there
is strong contrast between the subject and the background.
-- Spot metering cross hairs
Positions on the subject.
Multi(Multi-pattern Divides into multiple regions and measures each region. The
metering) camera determines a well-balanced exposure.
• For details on the exposure --+ page 11
• When using sput metering, setting [[:_] (Focus) to [Center AF] is recommended to fucus nn the metering
position (page 32).
33
To Next Page
Loading...
