Sony DSC-S60 - Page 85

The free capacity of the internal memory does not increase even when you
copy the data stored in the internal memory to a "Memory Stick".
• Tile data is not deleted al_er copying. Execute the [Format] command (page 50) to format the
internal memory afler copying the data.
Cannot copy the data stored in the internal memory to a "Memory Stick".
• Tilt.,"Memory Stick" is full. Check the capacity.
Cannot copy the data on the "Memory Stick" or the computer to the internal
memory.
• Data on a "Memory Stick" or a computer cannot be copied to tile internal memory.
A connection cannot be established.
• The canlera cannot be connected directly to a printer that is not compliant with the PictBridgc
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
• Sel [USB Connect] to [PiclBridge] in lhe _ (Selup) menu (page 54).
• Disconnect and connect the cable for multi-use terminal (DSC-$90/$80/$60) or Cyber-shot
Station (DSC-STS0) again. If an error message is indicated on the printen refer to the
operating instructions supplied with the printer.
The LCD screen turns off when you connect the camera to the pritner.
• Set IUSB Connect] to [PictBridge], and then connect the camera again (page 70).
Cannot print images.
•Check that tile camera and tile printer are properly connected using tile cable for multi-use _,4
terminal (DSC-$90/$80/$60) or Cyber-shot Station (DSC-ST80). _.
• Turn on the printer. For further informalion, refer to the operating instructions supplied wilh
it.
• If you select [Exit] during printing, images may not print. Disconnect and connect the cable
for multi-use terminal (DSC-$90/$80/$60) or Cyber-shot Station (DSC-ST80) again. If you t_
still cannot print your images_ disconnect the cable, turn the printer off and then on, then
connect the cable again.
• Movies cannot be printed.
• hnages shot using cameras other than this camera or images modified with a computer may
not be printed.
85