Printing is canceled.
• You disconnected the cable for multi-use terminal (DSC-$90/$80/$60) or Cyber-shot Station
(DSC-ST80) before the @ (Do not disconnect the cable for nmlti-use terminal/the USB
cable) mark disappears.
Cannot insert the date or print images in the index mode.
• The printer does not pro'ride these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be inserled in the index mode depending on the printer. Consult the printer
llnanufacturer.
.... is printed on the date-inserted part of the image.
• hnages that do not hax,e the recording data cannot be printed vdth the date inserted. Set IDate]
to [Off] and print the image again (page 72).
Cannot select the print size.
• Consult tile printer manufacturer as to v_hether tile printer can pro',,ide tile desired size.
Cannot print the image at the size selected.
• Disconnect tile cable for multi-use terminal (DSC-$90/$80/$60) or Cyber-shot Station (DSC-
ST80) and reconnect it whenever you change the paper size after the printer has been
connected to the callnera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 72) or the printea
Cannot operate the camera after canceling printing.
• Wait lbr a v_hilc as tile printer is carrying out tile cancellation. It may take some time
depending on the printer.
86
Your camera does not work.
• Use the type of batteries you can use with this camera (page 93).
• The battery level is low (The _\_ indicator appears). Charge the batteries or replace with new
ones (-+ st(l) 1 in "Read This Fi_t").
The power is on, but the camera does not work.
• The built-in microcomputer is not v_orking properly. Remo',,e the batteries, and then, after one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
• See page 17.
To Next Page
Loading...
