Sony FH-B500 - Mixing Operation

Timer-Activated
Operation continues)
(continued)
TIMER CONT 5
5 Press MEMORY/NEXT.
The preset items appear sequentially.
6 Prepare the program source by
inserting a disc or a tape.
¢ For listening to a tape:
Insert the tape in deck B.
¢ For listening to CD
insert a disc
7 Press POWER to turn off the system.
At the timer-on time, the system tums on
automatically.
Note
Timer setting is possible while the power is
tumed off; however, it is necessary to turn on
the power for inserting a disc.
To change timer settings
1 Press TIMER SET.
The timer-on hour flashes.
2 Press MEMORY/NEXT until the item to be
changed flashes.
3 Press PRESET/TIMER ~ or + to change
the item to the desired one.
4 Press MEMORY/NEXT until the timer-on
time appears.
The display, then shows the preset items
sequentially, and return to the previous
display.
When you do not want to operate the
timer
Press TIMER CONT (control) so that
“TIMER” disappears from the display.
To reactivate the timer, press TIMER CONT
to display “TIMER.”
When the power is already on at the preset
time
The function will be automatically changed to the
preset one, are We OS CES & roan
another function.
Sleep Timer Operation
By setting the sleep timer, the system power
can be tumed off after the preset duration
(up to 90 minutes).
Press SLEEP during play to select the
desired duration in minutes.
As you press SLEEP, the indication changes
as follows:
To disengage the sleep timer
Set the timer to “-- .”
To turn off the system before the
system is turned off by the sleep
timer
Press POWER.
To check the remaining time before the sleep
timer turns off the system
Press SLEEP once, and the remaining time
appears in minutes. The display retums to the
previous indication automatically after several
seconds,
Microphone Mixing
(Only for USA,Canadian and
Australian models)
Mixing Operation
9&2 mp S
CA
1 (Only for FH-B500K)
Turn down the MIC LEVEL (1, 2)
control(s).
2 Connect (a) microphone(s) to the MIX
MIC (1, 2) jack(s).
3 Press one of the function buttons (or
FUNCTION repeatedly on the remote
commander) to select program source
and play it.
4 sing or speak into the microphone.
5 (Only for FH-8500K)
Adjust the microphone level with the
MIC LEVEL (1, 2) controi(s).
6 (Only for FH-8500K)
Adjust the echo level with the
DIGITAL ECHO control.
7 Adjust the VOLUME control.
When the mixing is over
Be sure to disconnect the microphone.
(Only for FH-BS00K)
Then set the microphone level to the
minimum level with the MIC LEVEL (1, 2)
control(s).
Recording the sound mixed with a
source other than a tape in deck A
1 Mix the sound as described above.
2 = Insert a tape in deck B.
3 Start recording.
boa from the microphone only
Press CD (or FUNCTION repeatedly on
the remote commander) to select the CD
player. If a CD is being played, press @
to stop playing.
2 Start recording.