28
GB
NAS-E35HD.GB.3-292-247-11(1)
You can erase tracks on a connected USB device
from this unit.
Note
Make sure not to disconnect the USB device or turn the
power o until the erasing has completed.
1
Select the USB function and
connect the USB device with the
tracks you want to erase.
2
Enter the Option menu, and then
select “Erase”.
3
Press
/
to select the item to be
erased, and then press ENTER.
To erase the entire contents of the USB
device:
Select “All Erase”.
To erase a folder:
Select the folder, and then select “All
Track”.
To erase one track only:
Select the folder that contains the track
you want to erase, and then select the
track.
4
Press
/
to select “OK?”, and then
press ENTER.
To cancel erasing
Press .
It may take a while for the cancellation to take
eect.
Erasing tracks on the USB device
To Next Page
Loading...
