Sony HCD-541 - Selecting a Program SOUICE; Listening with the Surround Effect

istening wi
SYSTEM POWER
— ON
= | =
[ajn]a]
sco to
———
NL J
| Seamer [7/5]
aa ee ee ee
1 Select the program source.
The corresponding function name appears on the
display. (However, only VIDEO 1 appears on the
display when VIDEO 1/MD is selected.)
|
|
Pronorecord | PHONO
Radio Broadcast | TUNER
Function selector to be
pressed
VIDEO 1/MD or VIDEO 2
The MONITOR number on
the display shows which
video program source is
selected.
2 Start the selected program.
12
Surround Effect
alam]
_
— oy; (em | oe iC) |
PCC EO |
———
NT et Til |
re ry
~~ -10
| es |e)
1 Select the program source.
The corresponding function name appears on
the display.
ae ee
|
2 Start the selected program.
3 Press SURROUND ON/OFF to ON.
"SURROUND ON" appears on the display
4 Select the surround mode with the
SURROUND MODE* buttons
The corresponding surround mode name
appears on the display.
* You can select the appropriate surround mode
among the following modes.
DOLBY ** (Dolby Surround): Expands sound just like
listening to it in a movie theater.
HALL (Hall surround): Provides reverberation effect that is
produced in a concert hall.
SIMULATED (Simulated surround): Gives a simulated
stereo effect to monaural sound.
** Manufactured under license from Dolby Laboratories Licensing
Corporation. Additionally licensed under one or more of the
following patents: U.S. number 3,959,590: Canadian numbers
1,004,603 and 1,037,877. “Dolby”, “Pro Logic” and the double-D
symbo] 00 are trademarks of Dolby Laboratories Licensing
Corporation.
Note
No sound will be heard from the rear speakers, unless the
SURROUND ON/OFF button is set to ON.