Sony HCD-541 - Dubbing Tapes (from Deck a to B)

SYSTEM POWER
—ON
en es
[$58 basa CO
==
—— a
1 Press & to open the cassette compartments,
insert the tapes and close the cassette
compartments.
cen =
[ees a,
2 Select the direction mode.
w= C> RELAY
One side
DIRECTION
ae
st CD RELAY Dubbing of the
reverse side
starts
DIRECTION independently
a> <a of deck A.
s=* C> RELAY Dubbing of the
reverse side
starts
DIRECTION simultaneously
===> with deck A.
3 Press HIGH SPEED DUBBING.
The unit enters recording pause mode for high speed
dubbing, the 18 and indicators light.
(Dubbing can not be carried out without pressing
HIGH SPEED DUBBING.) :
HIGH SPEED
DUBBING
Select the side on which to start dubbing.
To dub from the front side, press >>.
To dub from the reverse side, press <.
Press 11 on deck B to start dubbing
The recording pause mode will be canceled and
dubbing starts.
PAUSE
The If indicator goes off.
To stop dubbing, press M on deck A or deck B.
Notes
* The tape in deck B is automatically recorded with the same
recording system as the original tape in deck A. So it is
unnecessary to adjust the recording level and selecting the
DOLBY NR.
* If the sound is affected by a television set during dubbing,
turn off the set or move it away from the unit.