Sony HCD-541 - Playing in a Desired Order - Program Play

Playing in a Desired Order — Program Play
You can make a program by designating up to 32 steps in the order you want them to be
played. The unit will play the disc according to your program.
This function is very convenient for recording on the cassette tape.
SYSTEM POWER 3a To program discs in the order you want
—- ON
to play.
Press DISC SELECT 1 - 5 in the order you
want to program.
DISC SELECT
= =
ee esi
“AL” appears in the display.
3-8 To program selections on a disc in the
order you want to play.
1) Select the desired disc with DISC SELECT
4 = 5.
1 Place discs with the label side up. DISC SELECT
After placing discs, press & to close the disc table. | ae | |
2) Press ii or >i repeatedly until the
desired selection is located.
2 Press PROGRAM so that "PROGRAM" i ssi ahaabts :
appears on the display.
= Selection to be
programed
3) Press PROGRAM.
ewe = J) (328
The selection is stored, and the blinking number in
the display light up.
Repeat 2) and 3) to select another selection.
To program the selection(s) on another disc, repeat
1), 2) and 3).