To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-EH25 and is the answer not in the manual?
General| Type | Mini Hi-Fi System |
|---|---|
| CD Player | Yes |
| Tuner | FM/AM |
| Bluetooth | No |
| USB Playback | Yes |
| Number of Discs | 1 |
| Playable Media | CD, CD-R, CD-RW |
| Audio formats | MP3 |
| Remote Control | Yes |
| Speaker Type | 2-way |
| Preset Stations | FM20/AM10 |
Details the power output ratings and input/output specifications for the amplifier.
Lists supported bit rates and sampling frequencies for USB playback.
Provides specifications for the CD player system, including laser diode properties.
Describes the recording system for the tape deck.
Lists tuning ranges and intermediate frequencies for FM and AM tuners.
Covers power requirements, consumption, dimensions, and weight of the unit.
Precautions for handling sensitive optical pick-up components and preventing electrostatic discharge.
Guidelines for safely checking laser diode emission from the optical pick-up block.
Information on characteristics and handling of lead-free solder used in the device.
Identifies and explains the function of the unit's buttons and remote control features.
Explains the various indicators and information displayed on the unit's screen.
Outlines the sequential steps required to disassemble the product for servicing.
Details the procedure for removing and disassembling the rear cabinet of the unit.
Instructions for disassembling the front and top cabinet sections and accessing the main board.
Steps for dismantling the tape mechanism deck and the cassette lid.
Procedure for accessing and removing the base unit block, including the CD mechanism.
Steps to disassemble and remove the optical pick-up block assembly.
Procedure to reset the unit to factory default settings, clearing all stored data.
Instructions for activating and using the panel test mode to check unit functions.
Guide for changing the AM tuning interval step between 9 kHz and 10 kHz.
Procedure to enter CD service mode for SLED adjustment and laser power control.
Explanation of error codes displayed for optical pick-up and CD board issues.
Safety and handling precautions before performing mechanical adjustments.
Specifications and procedures for measuring torque on various mechanical parts.
Method for measuring tape tension during playback.
Procedures and settings for deck section adjustments, including azimuth.
Specifies the test tape required and its signal characteristics for adjustments.
Detailed steps for adjusting the azimuth of the record/playback head for optimal performance.
Illustrates the signal flow and components within the CD servo control system.
Shows the block diagram for the tuner and USB interface sections of the device.
Depicts the main control, audio processing, and power supply circuits.
Shows the component layout on the CD board's component and conductor sides.
Provides the detailed circuit schematic for the CD board.
Illustrates the component placement on the USB board for both sides.
Presents the complete circuit schematic for the USB interface board.
Component layout diagram for the main circuit board.
Part one of the main board's schematic diagram, detailing circuit connections.
Part two of the main board's schematic diagram, illustrating further circuit details.
The final part of the main board's schematic, completing the circuit overview.
Component layout for the front panel board.
Detailed circuit schematic for the front panel interface board.
Component layout for the PT-VBUS board.
Circuit schematic for the PT-VBUS power supply board.
Illustrates the internal block diagrams of key integrated circuits.
Details the function and I/O of pins for major ICs used in the system.
An exploded view showing the general assembly of the main unit components.
Exploded view detailing parts of the front cabinet and associated sub-assemblies.
Exploded view illustrating the components of the top cabinet section.
Exploded view of the base unit, including the CD mechanism and optical pick-up.
List of electrical components for the CD section, including capacitors, ICs, and resistors.
Comprehensive list of electrical parts for the main board.
List of electrical components used on the panel board.
Electrical parts list for the PT-VBUS board.
