Sony HCD-HX3 - Setting the Clock

8
HCD-HX3/HX5/HX7
Information on the display
1
Play/Pause
2
DSGX
3
Tuner reception mode
Tuner reception
4
Text information
5
Audio format
6
Play mode
7
Timer
– HCD-HX3 –
Setting the clock
Use buttons on the remote to set the
clock.
1 Press "/1 to turn on the
system.
2 Press CLOCK/TIMER SET.
If the current mode appears on
the display, press ./>
repeatedly to select “CLOCK SET?”
and then press ENTER.
3 Press ./> repeatedly
to set the hour, and then press
ENTER.
4 Use the same procedure to set
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY. The clock is displayed
for about 8 seconds.
Information on the display
1
Play/Pause
2
DSGX
3
Tuner reception mode
Tuner reception
4
Text information
5
Audio format
6
Play mode
7
Timer
8
USB MEMORY
Lights up when an optional USB device
is connected.
– HCD-HX5 –
– HCD-HX7 –
Information on the display
1
Play/Pause
2
DSGX
3
Tuner reception mode
Tuner reception
4
Text information
5
Audio format
6
Play mode
7
Timer