HCD-M100/M300AV
SERVICE MANUAL
HCD-M100/M300AV is the tuner, deck, CD and
amplifier section in MHC-M100/M300AV.
SPECIFICATIONS
COMPACT COMPONENT SYSTEM
— Continued on next page —
Model Name Using Similar Mechanism HCD-MC3AV
CD Mechanism Type CDM-46B1
Optical Pick-up Name KSM-213BFN/C2NP
Model Name Using Similar Mechanism NEW
Tape Transport Mechanism Type TCM-230AWR21
CD
SECTION
TAPE DECK
SECTION
US Model
Amplifier section
U.S.A models:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6 Ω loads both channels driven, from 120 – 10,000 Hz; rated 75 W per
channel minimum RMS power, with no more than 10% total harmonic
distortion from 250 mW to rated output.
MHC-M300AV
Front Speaker:
Continuous RMS power output
75 + 75 W
(6 Ω at 1 kHz, 10% THD)
Total harmonic distortion
less than 0.09%
(6 Ω at 1 kHz, 40 W)
Center Speaker:
Continuous RMS power output
35 W
(6 Ω at 1 kHz. 10% THD)
Rear Speaker:
Continuous RMS power output
17.5 + 17.5 W
(12 Ω at 1 kHz, 10% THD)
MHC-M100
Continuous RMS power output
75 + 75 W
(6 Ω at 1 kHz, 10% THD)
Total harmonic distortion
less than 0.09%
(6 Ω at 1 kHz, 40 W)
Inputs
VIDEO/MD IN (phono jack):
voltage 250 mV/450 mV,
impedance 47 kΩ
Outputs
PHONES (stereo phone jacks):
accepts headphones of 8 Ω or more
FRONT SPEAKER: accepts impedance of 6 to 16 Ω
REAR SPEAKER: (M300AV only):
MHC-M300AV accepts impedance of 12 to 16 Ω
CENTER SPEAKER: (M300AV only):
accepts impedance of 6 Ω
SUPER WOOFER: (M300AV only):
voltage 1 V, impedance 1 kΩ
Manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol ; and
“PRO LOGIC” are trademarks of Dolby
Laboratories Licensing Corporation.
Photo: HCD-M300AV
Ver 1.1 2001. 07
9-929-271-12
2001G0200-1
© 2001.7
Sony Corporation
Home Audio Company
Shinagawa Tec Service Manual Production Group
To Next Page
Need help?
General
