To Next PageTo Next Page
Need help?Do you have a question about the Sony HCD-VX5A and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | HCD-VX5A |
| Category | Speaker System |
| Language | English |
Unit's self-diagnosis function for checking VIDEO board circuit conditions.
Precautions for preventing electrostatic breakdown of the laser diode.
Steps for removing the video board and CD mechanism deck.
Procedure for disassembling the tape mechanism deck section.
Steps for removing the main board from the unit.
Clears all data and resets the unit to initial conditions, used for customer return.
Resets the unit with preset data intact, similar to power cycling.
Moves the optical pick-up for safe transport, used after repair before customer return.
Activates all LEDs and the fluorescent indicator tube for key function testing.
Mode for operational check of the tape deck section working in parallel.
Procedure for adjusting head azimuth for optimal playback on both decks.
Procedure for adjusting tape speed on DECK B using test tape WS-48B.
Procedure for adjusting playback levels on DECK A and DECK B using test tape P-4-L300.
Block diagram illustrating the CD servo system signal flow and components.
Block diagram showing the signal paths for the audio and video CD sections.
Block diagram detailing the signal flow within the tape deck section.
Block diagram illustrating the signal paths within the main unit's circuitry.
Pin functions for the System Controller IC501 on the MAIN board.
Pin functions for the MPEG decoder IC505 on the VIDEO board.
Exploded view of the unit's cover and related parts, with part numbers.
Exploded view of the front panel assembly, showing all components and their part numbers.
