Sony HCD-VX222 - Setting the time

6
HCD-VX222
Setting the time
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
Proceed to step 5 when “CLOCK” appears
in the display.
3 Press v or V
vV
V
repeatedly to select “SET
CLOCK”.
4 Press ENTER.
5 Press or
v
repeatedly to set the hour.
6 Press .
The minute indication flashes.
7 Press or repeatedly to set the
minute.
8 Press ENTER.
Tip
If you made a mistake or want to change the time,
start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
B