47
Menu List
<SWITCH ASSIGN2>
11 (U10)
LENS VTR S/S OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2
JN/SY/UC models only.
Assigns a function to the VTR START/STOP switch
on the mounted lens.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD
CE/E models only.
Assigns a function to the VTR START/STOP switch
on the mounted lens.
FRONT RET1 OFF, RETURN1 SW
, RETURN2
SW, INCOM1, INCOM2,
D.EXTENDER
JN/SY/UC models only.
OFF, RETURN1 SW
, RETURN2
SW, ENG, PROD, D.EXTENDER
CE/E models only.
FRONT RET2 OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2,
D.EXTENDER
JN/SY/UC models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, D.EXTENDER
CE/E models only.
HANDLE SW1 OFF, RETURN1 SW
, RETURN2
SW, INCOM1, INCOM2, ZOOM(T)
JN/SY/UC models only.
OFF, RETURN1 SW
, RETURN2
SW, ENG, PROD, ZOOM(T)
CE/E models only.
HANDLE SW2 OFF, RETURN1 SW, RETURN2
SW, INCOM1
, INCOM2,
ZOOM(W)
JN/SY/UC models only.
OFF, RETURN1 SW, RETURN2
SW, INCOM1
, INCOM2,
ZOOM(W)
CE/E models only.
ZOOM SPEED 0 to 99, 20
HKCT INCOM MIC OFF, INCOM1, INCOM2 JN/SY/UC models only.
Assigns a function to the INTERCOM MIC switch on
the HKC-T1500.
OFF, ENG
, PROD CE/E models only.
Assigns a function to the INTERCOM MIC switch on
the HKC-T1500.
<RETURN>
12
RET1 SW SEL CCU RET1, CCU RET2,
CCU RET3, CCU RET4
Varies based on the RET1 button setting.
RET2 SW SEL Varies based on the RET2 button setting.
RET3 SW SEL CCU RET1, CCU RET2,
CCU RET3
, CCU RET4
RET1 SW + RET2 SW RET1 SW, RET3 SW
Changes operation when you press both the RET1
button and RET2 button at the same time.
RET1 SW: The two buttons function as the RET1
button.
RET3 SW: The two buttons function as the RET3
button.
VBS RET ASPECT EC
, SQ Sets the Aspect mode of the VBS RET when the
camera is used in stand-alone.
EC: Edge Crop
SQ: SQeeze
OPERATION
Page title
PageNo.
Item Settings Description
To Next Page
Loading...
