Sony HDC2400 - Page 51

51
Menu List
<WHITE CLIP>
P08
W CLIP –99 to +99, 0
ON, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 1>
P09
DETAIL ON
, OFF
LEVEL –99 to +99, 0
Absolute value is displayed in ABS mode.
LIMITER M –99 to +99, 0
LIMITER WHT –99 to +99, 0 Absolute value is displayed in ABS mode.
LIMITER BLK –99 to +99, 0
Absolute value is displayed in ABS mode.
CRISP –99 to +99, 0
Absolute value is displayed in ABS mode.
LEVEL DEPEND –99 to +99, 0
Absolute value is displayed in ABS mode.
ON
, OFF
ABS Highlighted: ABS (Absolute) mode
<DETAIL 2>
P10
H/V RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
FREQ –99 to +99, 0
Absolute value is displayed in ABS mode.
MIX RATIO –99 to +99, 0
Absolute value is displayed in ABS mode.
KNEE APT –99 to +99, 0
Absolute value is displayed in ABS mode.
ON, OFF
DTL H/V MODE H/V, V only
ABS Highlighted: ABS (Absolute) mode
<SKIN DETAIL>
P11
SKIN DTL ON, OFF
SKIN GATE OFF, 1, 2, 3, (MAT) 1, 2, 3: The skin gate function can be turned on for
the specified channel only.
(MAT): Displayed when GATE of <MULTI MATRIX>
is ON.
ABS Highlighted: ABS (Absolute) mode
NATURAL SKINDTL OFF
, ON
ZOOM LINK OFF
, ON
TELE 0 to 99
WIDE 0 to 99
CH SW 1: (ON), 2/3: ON, OFF
Sets the skin tone detail function independently for
each channel. (Channel 1 is always set to ON.)
Absolute values are indicated for LEVEL only in
ABS mode.
HUE 1/2/3: Execute via ENTER.
PHASE 1/2/3: 0
to 359
WIDTH 1/2/3: 0 to 90, 29
SAT 1/2/3: –99 to +99, –89
LEVEL 1/2/3: –99 to +99, 0
<USER MATRIX>
P12
R-G –99 to +99, 0
R-B –99 to +99, 0
G-R –99 to +99, 0
G-B –99 to +99, 0
B-R –99 to +99, 0
B-G –99 to +99, 0
MATRIX ON, OFF
PRESET ON, OFF
SMPTE-240M, ITU-709
, SMPTE-
WIDE, NTSC, EBU, ITU-601
USER ON, OFF
MULTI ON, OFF
ADAPTIVE MATRIX OFF, ON
PAINT
Page title
PageNo.
Item Settings Description