Sony HDC2400 - Page 52

52
Menu List
<MULTI MATRIX>
P13
PHASE 0, 23, 45, 68, 90, 113, 135, 158,
180, 203, 225, 248, 270, 293, 315,
338
Selects an axis (angle) at PHASE for which the
multimatrix adjustment to be made, and set HUE
and SAT. (HUE and SAT can be adjusted
independently for 16 axes.)
HUE –99 to +99, 0
SAT –99 to +99, 0
ALL CLEAR Execute via ENTER.
GATE ON, OFF
, (SKN) (SKN): Displayed when SKIN GATE of <SKIN
DETAIL> is ON.
MATRIX ON, OFF
PRESET ON, OFF
SMPTE-240M, ITU-709
, SMPTE-
WIDE, NTSC, EBU, ITU-601
USER ON, OFF
MULTI ON, OFF
<SHUTTER>
P14
SHUTTER ON, OFF, (ON), (OFF) Settings in ( ): When a remote control unit/panel or a
CCU is not connected (cannot be changed)
59.94i: 1/100
, 1/125, 1/250,
1/500, 1/1000, 1/2000
50i: 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000
29.97PsF: 1/40, 1/60, 1/100,
1/120, 1/125, 1/250, 1/500,
1/1000, 1/2000
25PsF: 1/33, 1/50, 1/100,
1/125, 1/250, 1/500,
1/1000, 1/2000
24PsF/23.98P: 1/32, 1/48,
1/96, 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
59.94P: 1/100, 1/125, 1/250,
1/500, 1/1000, 1/2000
50P: 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000
Step shutter selection
Note
The available settings for HDC2400/2550 are
59.94i, 50i, 59.94P and 50P only.
ECS FREQ 59.94i: 60.00
to 4300 Hz
50i: 50.00 to 4700 Hz
29.97PsF: 30.00 to 2700 Hz
25PsF: 25.00 to 2300 Hz
24PsF/23.98PsF: 24.00 to 2200 Hz
59.94P: 59.96 to 4600 Hz
50P: 50.03 to 4600 Hz
Note
The available settings for HDC2400/2550 are
59.94i, 50i, 59.94P and 50P only.
PAINT
Page title
PageNo.
Item Settings Description